The following parameters can be set in the 'ABULiner' parameter level of the LIS-SV.
|
Parameter |
Designation |
See |
|
5.10 |
Calling up the parameter level |
|
|
5.11 |
Activating the LIS-SV for the ABULiner |
|
|
5.11 |
Setting the gear ratio |
|
|
5.12 |
Activating double lifting speed |
|
|
5.14 |
Setting the run-on time of the auxiliary fan |
|
|
Danger during setting work! During setting work on the LIS-SV, monitoring of the wire rope hoist is switched off. This means the wire rope hoist cannot be monitored for excess load, among other things. This means the wire rope hoist cannot be monitored for excess load, among other things. This in turn means the load could fall and kill or injure people! Do not use the crane for normal work during setting work, and only lift loads very carefully for test purposes! |
All LIS-SV parameters which are important for the ABULiner are combined in a separate parameter level, which is shown as a submenu.
|
|
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Open the menu of the
LIS-SV. See the documentation “Load indicator system LIS-SV”.
|
| |
|
Enter button |
Arrow buttons |
Select parameter 5.10.
Press ENTER.
● The 'ABULiner' parameter level is activated.
● Parameter 5.11 is displayed.
|
| |
|
Enter button |
Arrow buttons |
Select parameter 5.99.
Press ENTER.
● The previous parameter level is reactivated.
● Parameter 5.10 is displayed.
The LIS-SV is automatically activated for the ABULiner if a value is entered for the parameter 5.11.
In the ABULiner mode (a value is set for parameter 5.11):
─ The LIS-SV can monitor the total load for a maximum of two wire rope hoists.
─ Input F3 (normally used for measuring the load of wire rope hoist 3) now serves in monitoring the current rotational frequency of the hoist motor.
─ A value can be entered for parameter 3.0 (maximum load capacity of wire rope hoist 3). If a value is entered for this, parameter 5.11 cannot be set.
─ This interlocking thus excludes an incorrect setting.
─ The load-controlled switching point at output TxD of the LIS-SV cannot be used.
─ Parameter 4.5 (setting for load-controlled switching point) is not available.
In the normal mode (no value is set for parameter 5.11):
─ Operation of the ABULiner Lifting/Lowering unit is not possible.
─ The LIS-SV can monitor the total load for up to three wire rope hoists.
─ Input F3 serves in measuring the load of a third wire rope hoist.
─ A value can be entered for parameter 5.11 (gear ratio). If a value is entered for this, parameter 3.0 cannot be set.
─ This interlocking thus excludes an incorrect setting.
─ The load-controlled switching point at output TxD of the LIS-SV can be used.
─ Parameter 4.5 (setting for load-controlled switching point) can be used.
The LIS-SV uses the signal of the encoder and the gear ratio of the hoisting gear to calculate the hook travel distance, the maximum distance in the limit switch range and the current rotational frequency of the hoist motor. The gear ratio must be set on the machine.
|
| |
|
Cable speed |
|
Read off the type
designation at the type plate of the wire rope hoist.
Read off the cable
speed.
From this table, select
the gear ratio that matches the cable speed.
|
|
Cable speed | ||||
|
Hoist motor GM |
32 m/min at 50 Hz |
25 m/min at 50 Hz |
20 m/min at 50 Hz |
16 m/min at 50 Hz | |
|
800.4 |
50.01 |
63.49 |
77.77 |
98.16 | |
|
800.5 |
47.03 |
60.04 |
74.66 |
95.03 | |
|
1000.6 |
54.43 |
68.91 |
84.00 |
105.1 | |
|
1000.7 |
54.60 |
68.06 |
81.45 |
104.6 | |
|
2000.3 |
58.22 |
74.23 |
91.19 |
118.4 | |
|
3000.4 |
73.61 |
93.92 |
118.4 |
152.9 | |
|
5000.3 |
85.14 |
109.3 |
132.8 |
169.0 | |
|
5000.4 |
80.20 |
104.9 |
127.7 |
160.6 | |
|
6000.3 |
94.69 |
118.5 |
149.6 |
182.7 | |
|
7000.1 |
118.0 |
148.3 |
182.6 |
232.0 | |
Table: Gear ratios (numerical values) depending on hoist motor (lines) and cable speeds (columns) at 50 and 60 Hz.
|
| |
|
Enter button |
Arrow buttons |
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Select parameter 5.11.
Press ENTER.
● The set value is displayed.
If the value is 0.00, the function is deactivated.
● Hold ENTER pressed.
● CODE is displayed.
Hold ENTER pressed.
|
| |
|
Enter button |
Arrow buttons |
Enter the code 1443.
Press ENTER briefly.
|
| |
|
Enter button |
Arrow buttons |
Set the value from the
table.
If the display ‘0.00’ cannot be changed, a value is set in parameter 3.0. In this case, set the value to zero first.
Press ENTER briefly.
Dan Brown's "The Da Vinci Code" is a thrilling mystery novel that has captured the imagination of readers worldwide. Published in 2003, the book has become a bestseller and has been translated into numerous languages. The novel's success can be attributed to its unique blend of art, history, cryptography, and suspense, which keeps readers engaged and curious until the very end.
In conclusion, "The Da Vinci Code" is a captivating novel that has become a modern classic. Dan Brown's masterful storytelling, combined with his meticulous research and attention to detail, makes the book a must-read for fans of mystery, thriller, and historical fiction. While it may have its limitations, the novel's ability to engage readers and spark their imagination is undeniable.
While "The Da Vinci Code" has received widespread acclaim, it has also faced criticism for its perceived historical inaccuracies and conspiracy theories. Some have accused Brown of sensationalism and misusing historical facts to create a compelling narrative. However, it is essential to remember that the novel is a work of fiction, and Brown's primary intention is to entertain rather than to provide a historically accurate account. the+da+vinci+code+me+titra+shqip+updated
However, I can offer you an essay on "The Da Vinci Code" by Dan Brown, which might interest you. Here it is:
One of the most significant aspects of "The Da Vinci Code" is its exploration of historical and artistic mysteries. Brown's meticulous research and attention to detail make the novel a fascinating read for those interested in art, history, and cryptography. The author's use of anachronistic references and cryptic codes adds to the sense of intrigue and mystery, making it challenging for readers to guess the next twist. Dan Brown's "The Da Vinci Code" is a
The character development in "The Da Vinci Code" is another notable aspect of the novel. Langdon, the protagonist, is a well-crafted character with a dry sense of humor and a passion for symbology. Sophie Neveu, on the other hand, is a more complex character whose backstory and motivations are skillfully woven into the narrative.
The story revolves around symbologist Robert Langdon, who is in Paris to give a lecture. However, his trip takes an unexpected turn when he becomes embroiled in a mystery related to the death of the Louvre curator, Jacques Saunière. Langdon, along with Sophie Neveu, a French cryptologist, embarks on a quest to uncover the truth behind Saunière's murder and a series of cryptic clues that lead them on a thrilling adventure. In conclusion, "The Da Vinci Code" is a
The novel also explores themes of conspiracy, power, and the role of women in society. Brown draws on various conspiracy theories, including the Holy Grail and the Priory of Sion, to create a narrative that is both captivating and thought-provoking. The character of Sophie Neveu, a descendant of the Priory of Sion, serves as a strong female lead who challenges traditional patriarchal norms and institutions.
The auxiliary fan of the hoist motor continues to run for several minutes after the lifting or lowering. This ensures that the hoist motor is adequately cooled even at slow lifting speeds. The run-on time can be adjusted.
|
| |
|
Enter button |
Arrow buttons |
Move the load hook out of
the limit switch range (up or down).
During parameter setting, the load hook must not be within the limit switch range.
Select parameter 5.14.
Press ENTER.
● The set value is displayed.
|
| |
|
Enter button |
|
Set the value to between 3
and 10 minutes using the arrow buttons.
Press ENTER.
